Best FFL Software

Best FFL Software for A&D Records


Now that you’ve got your FFL, you’re going to need a way to manage your Acquisition and Disposition (A&D) records.

This is an important decision to make now – it can be difficult to switch from one set of FFL records to another (but not impossible).

What are Acquisition & Disposition (A&D) records?

A&D records track all the firearms that an FFL has received or made (acquired) and each of those firearms that the FFL has either sold, transferred, or destroyed (dispositions). Your A&D records not only show the history of your gun business, they also are what the ATF will use to conduct an inventory during an ATF compliance inspection.

A&D records are also sometimes called “Bound Book” records because gun dealer records used to literally be kept in a book with bound pages. The left page of the bound book contained the FFL’s firearm acquisition information, and the right page of the FFL’s bound book records listed firearm disposition information.

As a firearm is acquired (made or received) on the left side, the same line on the right side stayed empty / blank until the firearm was disposed (sold, transferred, or destroyed). These entries are sometimes called “open dispositions” because the disposition column for that firearm entry is “open.”

During an inspection, the ATF will ask to see all the “open dispositions” because each of those firearm records in your bound book should correspond to a firearm in your inventory.

The A&D / bound book is the heart of an FFL’s records. Yes, 4473s (for customer purchases) are very important too (most violations of the law come from these) but the core records for every FFL are the A&D records. This is because every FFL will at some point acquire, and probably dispose, at least one firearm. But, not every FFL will transfer a firearm to a non-FFL on a 4473.

As we cover in our ATF Compliance training course, the ATF is concerned mainly with the traceability of firearms. This means that they need to be able to trace a firearm used in a crime from the manufacturer down through the stream of commerce (this includes you) to the end-user. When the ATF calls to trace a firearm, you will rely on your A&D records, in conjunction with a Form 4473 if you transferred to a non-FFL, to help the ATF to know where the firearm came from and where it went.

FFL Bound Books

If you’re reading this article, you most like already have your FFL and are looking to stay compliant with ATF rules and regulations. Let’s cover some of what’s required. If you’d like to learn more, you really should check out our ATF Compliance training course.

As an FFL, whether you’re a gun dealer, firearm manufacturer, or arms importer, you must acquire and dispose of firearms within a certain time period and in a certain format. If you’d like an up-to-date copy of all the firearms rules and regulations, you might want to pick up a copy of the Federal Firearms Regulations Reference Guide (free to all RocketFFL students).

You must enter the information that is marked on the actual firearm. After all, that is the information that law enforcement will use to trace the firearm – they won’t have the box, the shipping invoice, nor the marketing materials. Be very careful here – the requirements for the information change if the firearm is imported.

The firearm acquisition information in your bound book must include:

  • Manufacturer and Importer (if any)
  • Model
  • Serial Number
  • Type
  • Caliber or Gauge
  • Date Acquired
  • Name and address of individual received from OR name and FFL Number of FFL if it was a transfer in from another FFL (if you made it, then your info goes here)

The disposition information of your FFL A&D record must include:

  • Date disposed
  • Name of who disposed to
  • If another FFL, then the address or FFL number of the FFL. If an individual (non-FFL), then their address or 4473 file number if you file your 4473s numerically.

Here’s an example from the ATF for the proper A&D record format. Note the ATF made an error in their example, they have the disposition date located under the “Receipt” column. Life’s not fair, if you make the same/similar mistake, you could get into trouble:

As an example of the correct format for acquisition information with the wrong information – if you can’t spot the 7 errors in the firearms’ description information, then you really should consider joining our ATF Compliance program. These are violations if found in your AD records.

Manufacturer and Importer (if any)ModelSerial NumberTypeCaliber or Gauge Date
GlockG1912345678Handgun9mm1/1/16
SpringfieldXD23456789Handgun 45 AUTO1/2/16

There are also time limits, depending on the type of acquisition or disposition, that your bound book entries must be made within. The date is the actual date you acquired or disposed the firearm, not the date that you made the record. If you make a correction, please ensure that you are doing it the proper way! The ATF Compliance training course is starting to sound like a better idea, isn’t it?

Paper records are perfectly legal, but as you can imagine, using electronic software for your A&D records can save a lot of time and allow for more accurate records.

Firearms Dealer Software

As a firearms attorney, my clients are constantly asking me which software I recommend – they often ask me this after they’ve been using one of the available A&D software solutions and have run into troubles getting it to work properly or worse… after they just received violations from the ATF for using non-complaint software.

I will say this: until recently, my answer to my clients was, “No current A&D software works nor is it compliant.” I’ve since had the opportunity to work with and review some of the leading software providers and each have pros and cons.

It is extremely important that you are positive that your FFL software is compliant! If you get a violation from the ATF for using non-compliant software, it is NO excuse that the software wasn’t designed by you. The ATF will not endorse particular software and you’re at the mercy of the ATF if you software doesn’t handle certain transactions properly, doesn’t backup/save the information correctly, or doesn’t output the information in an ATF approved format.

The ATF has recently published some new rulings that change the standards with which your FFL software must comply. These are ATF Rulings 2016-1, 2016-2, and 2016-3. If you’re already a student of RocketFFL, you’ll automatically receive a notification whenever a new ruling is introduced, and you’ll get updated information on how it affects you.

Also, your access to courses is not limited, you’ll be able to return to the course to reviews information as needed and see the updated info in the course.

Software can be either downloaded to your local computer or it can be used “in the cloud.” I strongly recommend the latter – cloud-based software is definitely my preferred solution.

Cloud-based Software

FFL Software in “the cloud” is software that exists on the software company’s servers and is accessible by you or your employees on any internet connected device.

Some of you may not think that this is smart or reliable – but it is! Here are just a few examples of “cloud-based” services that you probably already trust and use:

By using FFL software over the internet, you are able to view and work with your bound book even if you’re on-the-road, your power went out at your building (and you go somewhere else or use a smart phone), or the worst case scenario: a fire, theft, or natural disaster destroyed your computer!

Also, when the ATF changes the rules/regs for FFL record-keeping and/or the company makes an improvement to your software, changes are usually instantaneous and you don;t have to worry about upgrading software or worry about which version of the software you’er using – you just log on and go.

If you downloaded the software to your computer and something happens to that computer, or you are away from the computer, then you’ve just lost access to an FFL’s most vital record! Of course, you MUST keep a daily local backup of your A&D records on-site. Each of the FFL software solutions below allow you to do this.

Let’s compare the three most popular “cloud-based” FFL software solutions (if you’re impatient, you can just skip down to see the winner). Each of these solutions offer in-network transfers – this means that if you transfer or acquire to/from another user, then you’ll see the information will automatically be passed along with the transfer.

Because each software solution provider has different pricing and feature levels, I’ve compared each with one set of information assuming 1,000 A&D transactions per year, three users, and I’ve included the best available rankings for each:

CostUsersExtra usersTOTAL w/3 usersReviews
FFL Boss$49/mounlimitedn/a$49/mo5/5 (29 reviews)*
FastBound$79/mounlimitedn/a$79/mo5/5 (1 review)*
Epicor$59/mo1$9$78/mo3.5/5 (45 reviews)*

* FFL Boss and FastBound reviews from Facebook on 10/07/17. Epicor reviews from SoftwareAdvice.com on 10/06/17.

Downloadable Software

For the reasons above, you really should not be using downloadable A&D software for your FFL.

However, if you really must do it, and you don’t mind the risk, high up-front costs, or having to deal with updates, here are the most popular options compared.

As a note, as the rest of the world transitions to “cloud-based” software, there’s no guarantees that these FFL software providers will be around in the future.

Also, in my experiences, the customer service for cloud-based services is almost always better than for downloadable software. This might be due to the fact that the cloud-based services above are motivated to continue to keep you happy whereas once you’ve paid for and downloaded software, there’s no future benefit for some companies.

This comparison assumes 1,000 A&D transactions per year and three users:

CostPC/MacReviews
Coloseum$499.95PC only?*
vBound$399PC only?*
FFL Tools$495PC only?*
EZ Arms Keeper$350PC only?*

* Note – none of these solutions have ratings available.

Best FFL Bound Book Software

Here’s what you came here for…

Honestly, it’s hard to pick a “best” because each solution has it’s own pros and cons – you can’t really go wrong with any of the cloud-based FFL software providers. In fact, at various times, I’ve recommended different bound book software to different clients based on their needs.

However, RocketFFL has partnered with and strongly endorses and recommends FFL Boss.

FFL Boss has amazing software AND customer service! Try it out for yourself: if you sign up for FFL Boss using the button below, you’ll get a $1 trial and watch and see what happens next. I bet you’ll receive a call from the President and he’ll work to schedule a one-on-one walk-through of how their FFL software works and show you why we think it’s the best bound book solution for your FFL.

Use this link to get your $1 trial of FFL Boss A&D software:

[button link=”https://rocketffl.com/fflboss/” type=”big” newwindow=”yes”] FFL Boss $1 Trial[/button]

Ryan Cleckner is a former special operations sniper and current attorney specializing in firearms law/ATF compliance and is a firearms industry executive (former govt. relations manager for NSSF, Vice President of Remington Outdoor Company, and a SAAMI voting board member).

Recommended Posts

FFL License Types

FFL License Types – Which FFL Should You Get? [2021]

There a different types of FFL to choose from. Make sure you understand which FFL type is best for you.

Federal Firearm License Application Timeline

How Long Does it Take to Get an FFL?

When you’re trying to decide whether you should get a federal firearms license (FFL), one of the things you may wonder about is how long it’s going to take the ATF to approve your FFL application, and give you a federal firearms license. This is a fair concern, especially when dealing with the ATF. After […]

West Virginia state flag

How to Get an FFL in West Virginia (WV): 2021 Dealers Guide

A growing number of people across the nation want to serve the general public as Federal Firearms License (FFL) holders. FFL dealers are permitted by federal law to handle the selling and distribution of firearms and ammo. There are just a few requirements to follow to get your FFL in West Virginia. At Rocket FFL, […]

7 thoughts on “Best FFL Software for A&D Records

Comments
  1. Matt

    Not a bad article. Unfortunately you allow your personal preference for cloud services to outweigh other options in the article that could be appropriate for many dealers.

    There are many good reasons to use installable software. For example the cloud based services are just the monthly paid services that never stop and have an ongoing cost. A second example is none of those online cloud services can handle multiple locations. So if you have a few stores you cannot see everything in one view and have to pay the monthly cost for each store. And of course if the internet is down or slow in a particular location that will hinder the ability to use the cloud service.

    I’ve personally tried all of these FFl A&D books, cloud and local, I can honestly say FFLBoss is not very flexible you have to change your business to accommodate their process. Their e4473 is nothing more than an online PDF with a signature. I get the a feeling you are using FFl boss or they are your friends.

    The industry does not need any more people telling them what to do, better to give good descriptions of each solution and provide honest pros and cons, then let the FFL dealer choose for themselves.

Leave a comment

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Ready to start making money with guns?

Get Your FFL Now!
You’re protected by our 60-day money-back guarantee